Support
marinethai
091-5758564, 081-6679233 ,02 7035192
Your shopping cart
ดูตะกร้าสินค้าของคุณ
ไม่มีสินค้าในตะกร้าของคุณ
จำนวนครั้งที่เปิดดูสินค้า : 8691 | ความคิดเห็น: 0

ปั๊มจุ่มแบตเตอรี่ ZUZUMI Z-3000/ 24V

 เพิ่มเมื่อ: 11/06/2013
 แก้ไขล่าสุด: 12/09/2019
 เบอร์โทรติดต่อ: 091-5758564, 081-6679233 ,02 7035192
 อีเมลล์: ChotigaLim@gmail.com LINE ID.nisakornn1

รายละเอียด:
ปั๊มจุ่มแบตเตอรี่ รุ่น 24V
1,800.00 บาท

 สินค้าที่เกี่ยวข้อง

ปั๊มน้ำ Water Pump 1 นิ้ว 200W พร้อมถังลม (สินค้าหมด) ตู้ชาร์ตแบตเตอรี่ AUTOMATIC60A ไฟเข้า 220V ไฟออก 24V มีไฟโชว์ 3ดวง ลูกลอยแบบกลมสายยาว 3ม.ขาย530, 4ม.ขาย590, 5ม.ขาย650 ตู้ชาร์ทแบตเตอรี่ (สินค้าหมด) ลุูกลอยระดับน้ำ แบบเหลี่ยม สายยาว 3เมตร 4เมตร 5เมตร

                                                    ปั๊มจุ่มแบตเตอรี่ ZUZUMI รุ่น Z-3000 /24V

SUBMERSIBLE   PUMP

MARINEPET

 Be sure to read this manual before operaeion

NOT

  1. Don't run dry
  2. Don't dip the end of the wire in the water
  3. Be careful for the power voltage.

BL – 2524N, is for DC – 24V, BL2512N is for DC – 12 V. Don't mistake voltage, also connect white wire to + (plus), black wire to – ( minus). In case connecting another wire, use over 0.75 mm²

  1. Don't pull the wire. Don't handle roughly. Don't drop the pump
  2. In case of using the pump for discharging of Bilge water, the end of the delivery hose should be over the water surface. Otherwise by siphoning, the water will flow back into the bottom of the boat.
  3. Can use in a little bit oil mixed water, but don't use in gasoline, kerosene, machines oil, and solvents.
  4. Dust clogging in strainer is very often seen, this cause delivery volume decreasing. Please check the strainer occasionally.

CHARACTERISTICS

  1. Large delivery volume, high delivery pressure  aimed the maximum of this class
  2. Continuous running in the water in no problem. Unique motor cooling system enables continuous running
  3. Double mechanical seal system equipped guarantees the complete shaft sealing
  4. Using 304 Stainless, Saltwater-proof aluminum alloy, anti-shock PBT plastics assure long durability, perfect against saltwater corrosion
  5. Small size, light, compact, easy to handle
  6. Strainer can be quickly removed without tool, make it to clean inside
  7. Wire and pump-connection part is strengthen by chain, this protects the grand part and prevent water leakage into motor room.

NO

NAME

QTY

1

Motor

1

2

Motor Flange

1

3

Motor Housing

1

4

Impeller

1

5

Impeller casing

1

6

Strainer

1

7

Gland

1

8

Oil seal

1

9

Mechanical seal

1

10

Wire rubber

1

11

Wire

1

12

Wire band

1

13

Rubber washer

2

14

Chain

1

15

Chain stopper

2

16

O ring

1

17

Press terminal

2

18

Stop ring

1

 

 

TROUBLE & REMEDY

 

Trouble

Causing

Remedy

 

Pump does not revolve

In correction of wire

Connection Sticking of

impeller

Disconnection of wire

Connect securely

Disassemble & clean

Exchange the wire

 

 

 

 

Pumping volume is small

Miss commection of+&-

Clogging of foreign substance in impeller

Clogging in strainer

Water leak from delivery hose Too this or long delivery hose

Voltage down of power  source Weak power source Weak of impeller Delivery head is too high

Connect correctly Disassemble & clean

 

Take off the strainer & clean

Stop leak

Thicken or shorten the hose Charge battery

Exchange battery Replace impeller Make low the head

 

 

 

Electricity leaks

The end of the wire is dipping in the water

Wire connecting part is dipping in the water

Looseness of screws in gland part

Break down of the mechanical seal

Pull

 

Pull up the part

 

Tighten the screw

 

Change mechanical seal

 

How to take off the strainer cover:

  You can easily find 2 hooks around the strainer cover. Push these hooks inside, the strainer can by sliding.

 

SPECIFICATION

MODEL

BL2524S,BL2512S

BL2524N,BL2512N

BL3224S,BL3212S

Outlet   Outletdia.

25m/m( 1" )

25m/m(1" )

32m/m(1.2 ")

De        Delivery Volume          

70ℓ/min.18.5U.S.G/min

70ℓ/min.18.5U.S.G/min

100ℓ/min

Deliv    Delivery head

4m

6m

4m

             Water temp.

0-60° C

0-60° C

0-60° C

Power

DC-24V,DC-12V

DC-24V,DC-12V

DC-24V,DC-12V

              Current

2.5A,5.4A

3.8A,7.8A

3.8A,7.8A        

Rating

Continuous

Continuous

Continuous

Motor    Power

45w/5400rpm

55w/7000rpm

60w/6800rpm

Weight

1.3kg

1.3kg

1.3kg

Standard Accessory

Elbow1

Elbow1

Elbow1

 

APPLICATION

  1. Pumping out water from ice
  2. Pumping fresh water in preserve
  3. Discharging of Bilge water
  4. Emergency pumping on the boat
  5. Washing on the deck
  6. Water exchanging in fish farm
  7. For camping use
  8. Car washing

 INSTALLATION

Install the pump body ( Strainer cover ) on the desired locations. Use 4-M4 x 12 screws to fix the body.

 SPECIFICATION

Model

WWB-05806

WWB-05807

WWB-05808

WWB-06928

Outlet dia.

1⅛ 29.5mm

1⅛ 28.5mm

1⅛ 28.5mm

1¼ 32mm

Delivery volume

1000GPH

1500GPH

2000GPH

3000GPH

Delivery head

4m

4m

4m

5m

Water temp

0-60°C

0-60°C

0-60°C

0-60°C

Power

DC-12V,DC-24V

DC-12V,DC-24

DC-12V,DC-24

DC-12V,DC-24V

Current

5.5A,3.5A

8A,5A

11A,6A

13A,9A

Rating

Continuous

Continuous

Continuous

Continuous

Motor power

45w,5500rpm

75w,6000rpm

85w/7000rpm

105w/7500rpm

Weigh

0.8kg

1.2kg

1.4kg

2.1kg

Standard Accessory

El bowl

El bowl

El bowl

El bowl

 

                                           ปั๊มจุ่มแบตเตอรี่ ZUZUMI รุ่น Z-3000 12V

SUBMERSIBLE   PUMP

MARINEPET

 Be sure to read this manual before operation

NOT

  1. Don't run dry
  2. Don't dip the end of the wire in the water
  3. Be careful for the power voltage.

BL – 2524N, is for DC – 24V, BL2512N is for DC – 12 V. Don't mistake voltage, also connect white wire to + (plus), black wire to – ( minus). In case connecting another wire, use over 0.75 mm²

  1. Don't pull the wire. Don't handle roughly. Don't drop the pump
  2. In case of using the pump for discharging of Bilge water, the end of the delivery hose should be over the water surface. Otherwise by siphoning, the water will flow back into the bottom of the boat.
  3. Can use in a little bit oil mixed water, but don't use in gasoline, kerosene, machines oil, and solvents.
  4. Dust clogging in strainer is very often seen, this cause delivery volume decreasing. Please check the strainer occasionally.

CHARACTERISTICS

  1. Large delivery volume, high delivery pressure  aimed the maximum of this class
  2. Continuous running in the water in no problem. Unique motor cooling system enables continuous running
  3. Double mechanical seal system equipped guarantees the complete shaft sealing
  4. Using 304 Stainless, Saltwater-proof aluminum alloy, anti-shock PBT plastics assure long durability, perfect against saltwater corrosion
  5. Small size, light, compact, easy to handle
  6. Strainer can be quickly removed without tool, make it to clean inside
  7. Wire and pump-connection part is strengthen by chain, this protects the grand part and prevent water leakage into motor room.

NO

NAME

QTY

1

Motor

1

2

Motor Flange

1

3

Motor Housing

1

4

Impeller

1

5

Impeller casing

1

6

Strainer

1

7

Gland

1

8

Oil seal

1

9

Mechanical seal

1

10

Wire rubber

1

11

Wire

1

12

Wire band

1

13

Rubber washer

2

14

Chain

1

15

Chain stopper

2

16

O ring

1

17

Press terminal

2

18

Stop ring

1

 

 

TROUBLE & REMEDY

 

Trouble

Causing

Remedy

 

Pump does not revolve

In correction of wire

Connection Sticking of

impeller

Disconnection of wire

Connect securely

Disassemble & clean

Exchange the wire

 

 

 

 

Pumping volume is small

Miss connection of+&-

Clogging of foreign substance in impeller

Clogging in strainer

Water leak from delivery hose Too this or long delivery hose

Voltage down of power  source Weak power source Weak of impeller Delivery head is too high

Connect correctly Disassemble & clean

 

Take off the strainer & clean

Stop leak

Thicken or shorten the hose Charge battery

Exchange battery Replace impeller Make low the head

 

 

 

Electricity leaks

The end of the wire is dipping in the water

Wire connecting part is dipping in the water

Looseness of screws in gland part

Break down of the mechanical seal

Pull

 

Pull up the part

 

Tighten the screw

 

Change mechanical seal

How to take off the strainer cover:

  You can easily find 2 hooks around the strainer cover. Push these hooks inside, the strainer can by sliding.

 

SPECIFICATION

MODEL

BL2524S,BL2512S

BL2524N,BL2512N

BL3224S,BL3212S

Outlet  dia.

25m/m( 1" )

25m/m(1" )

32m/m(1.2 ")

Delivery Volume

70ℓ/min.18.5U.S.G/min

70ℓ/min.18.5U.S.G/min

100ℓ/min

Delivery head

4m

6m

4m

Water temp.

0-60° C

0-60° C

0-60° C

Power

DC-24V,DC-12V

DC-24V,DC-12V

DC-24V,DC-12V

Current

2.5A,5.4A

3.8A,7.8A

3.8A,7.8A

Rating

Continuous

Continuous

Continuous

Motor  Power

45w/5400rpm

55w/7000rpm

60w/6800rpm

Weight

1.3kg

1.3kg

1.3kg

Standard Accessory

Elbow1

Elbow1

Elbow1

 

APPLICATION

  1. Pumping out water from ice
  2. Pumping fresh water in preserve
  3. Discharging of Bilge water
  4. Emergency pumping on the boat
  5. Washing on the deck
  6. Water exchanging in fish farm
  7. For camping use
  8. Car washing

 

 

 

INSTALLATION

Install the pump body ( Strainer cover ) on the desired locations. Use 4-M4 x 12 screws to fix the body.

 

SPECIFICATION

Model

WWB-05806

WWB-05807

WWB-05808

WWB-06928

Outlet dia.

1⅛ 29.5mm

1⅛ 28.5mm

1⅛ 28.5mm

1¼ 32mm

Delivery volume

1000GPH

1500GPH

2000GPH

3000GPH

Delivery head

4m

4m

4m

5m

Water temp

0-60°C

0-60°C

0-60°C

0-60°C

Power

DC-12V,DC-24V

DC-12V,DC-24

DC-12V,DC-24

DC-12V,DC-24V

Current

5.5A,3.5A

8A,5A

11A,6A

13A,9A

Rating

Continuous

Continuous

Continuous

Continuous

Motor power

45w,5500rpm

75w,6000rpm

85w/7000rpm

105w/7500rpm

Weigh

0.8kg

1.2kg

1.4kg

2.1kg

Standard Accessory

El bowl

El bowl

El bowl

El bowl

SUBMERSIBLE   PUMP

MARINEPET

 Be sure to read this manual before operation

NOT

  1. Don't run dry
  2. Don't dip the end of the wire in the water
  3. Be careful for the power voltage.

BL – 2524N, is for DC – 24V, BL2512N is for DC – 12 V. Don't mistake voltage, also connect white wire to + (plus), black wire to – ( minus). In case connecting another wire, use over 0.75 mm²

  1. Don't pull the wire. Don't handle roughly. Don't drop the pump
  2. In case of using the pump for discharging of Bilge water, the end of the delivery hose should be over the water surface. Otherwise by siphoning, the water will flow back into the bottom of the boat.
  3. Can use in a little bit oil mixed water, but don't use in gasoline, kerosene, machines oil, and solvents.
  4. Dust clogging in strainer is very often seen, this cause delivery volume decreasing. Please check the strainer occasionally.

CHARACTERISTICS

  1. Large delivery volume, high delivery pressure  aimed the maximum of this class
  2. Continuous running in the water in no problem. Unique motor cooling system enables continuous running
  3. Double mechanical seal system equipped guarantees the complete shaft sealing
  4. Using 304 Stainless, Saltwater-proof aluminum alloy, anti-shock PBT plastics assure long durability, perfect against saltwater corrosion
  5. Small size, light, compact, easy to handle
  6. Strainer can be quickly removed without tool, make it to clean inside
  7. Wire and pump-connection part is strengthen by chain, this protects the grand part and prevent water leakage into motor room.

NO

NAME

QTY

1

Motor

1

2

Motor Flange

1

3

Motor Housing

1

4

Impeller

1

5

Impeller casing

1

6

Strainer

1

7

Gland

1

8

Oil seal

1

9

Mechanical seal

1

10

Wire rubber

1

11

Wire

1

12

Wire band

1

13

Rubber washer

2

14

Chain

1

15

Chain stopper

2

16

O ring

1

17

Press terminal

2

18

Stop ring

1

 

 

TROUBLE & REMEDY

 

Trouble

Causing

Remedy

 

Pump does not revolve

In correction of wire

Connection Sticking of

impeller

Disconnection of wire

Connect securely

Disassemble & clean

Exchange the wire

 

 

 

 

Pumping volume is small

Miss connection of+&-

Clogging of foreign substance in impeller

Clogging in strainer

Water leak from delivery hose Too this or long delivery hose

Voltage down of power  source Weak power source Weak of impeller Delivery head is too high

Connect correctly Disassemble & clean

 

Take off the strainer & clean

Stop leak

Thicken or shorten the hose Charge battery

Exchange battery Replace impeller Make low the head

 

 

 

Electricity leaks

The end of the wire is dipping in the water

Wire connecting part is dipping in the water

Looseness of screws in gland part

Break down of the mechanical seal

Pull

 

Pull up the part

 

Tighten the screw

 

Change mechanical seal

 

How to take off the strainer cover:

  You can easily find 2 hooks around the strainer cover. Push these hooks inside, the strainer can by sliding.

 

SPECIFICATION

MODEL

BL2524S,BL2512S

BL2524N,BL2512N

BL3224S,BL3212S

Outlet  dia.

25m/m( 1" )

25m/m(1" )

32m/m(1.2 ")

Delivery Volume

70ℓ/min.18.5U.S.G/min

70ℓ/min.18.5U.S.G/min

100ℓ/min

Delivery head

4m

6m

4m

Water temp.

0-60° C

0-60° C

0-60° C

Power

DC-24V,DC-12V

DC-24V,DC-12V

DC-24V,DC-12V

Current

2.5A,5.4A

3.8A,7.8A

3.8A,7.8A

Rating

Continuous

Continuous

Continuous

Motor  Power

45w/5400rpm

55w/7000rpm

60w/6800rpm

Weight

1.3kg

1.3kg

1.3kg

Standard Accessory

Elbow1

Elbow1

Elbow1

 

APPLICATION

  1. Pumping out water from ice
  2. Pumping fresh water in preserve
  3. Discharging of Bilge water
  4. Emergency pumping on the boat
  5. Washing on the deck
  6. Water exchanging in fish farm
  7. For camping use
  8. Car washing

INSTALLATION

Install the pump body ( Strainer cover ) on the desired locations. Use 4-M4 x 12 screws to fix the body.

SPECIFICATION

Model

WWB-05806

WWB-05807

WWB-05808

WWB-06928

Outlet dia.

1⅛ 29.5mm

1⅛ 28.5mm

1⅛ 28.5mm

1¼ 32mm

Delivery volume

1000GPH

1500GPH

2000GPH

3000GPH

Delivery head

4m

4m

4m

5m

Water temp

0-60°C

0-60°C

0-60°C

0-60°C

Power

DC-12V,DC-24V

DC-12V,DC-24

DC-12V,DC-24

DC-12V,DC-24V

Current

5.5A,3.5A

8A,5A

11A,6A

13A,9A

Rating

Continuous

Continuous

Continuous

Continuous

Motor power

45w,5500rpm

75w,6000rpm

85w/7000rpm

105w/7500rpm

Weigh

0.8kg

1.2kg

1.4kg

2.1kg

Standard Accessory

El bowl

El bowl

El bowl

El bowl

 

 ปั๊มจุ่มแบตเตอรี่ ZUZUMI รุ่น Z-3000 12V

SUBMERSIBLE   PUMP
MARINEPET
 Be sure to read this manual before operation
NOT
  1. Don't run dry
  2. Don't dip the end of the wire in the water
  3. Be careful for the power voltage.
BL – 2524N, is for DC – 24V, BL2512N is for DC – 12 V. Don't mistake voltage, also connect white wire to + (plus), black wire to – ( minus). In case connecting another wire, use over 0.75 mm²
  1. Don't pull the wire. Don't handle roughly. Don't drop the pump
  2. In case of using the pump for discharging of Bilge water, the end of the delivery hose should be over the water surface. Otherwise by siphoning, the water will flow back into the bottom of the boat.
  3. Can use in a little bit oil mixed water, but don't use in gasoline, kerosene, machines oil, and solvents.
  4. Dust clogging in strainer is very often seen, this cause delivery volume decreasing. Please check the strainer occasionally.
CHARACTERISTICS
  1. Large delivery volume, high delivery pressure  aimed the maximum of this class
  2. Continuous running in the water in no problem. Unique motor cooling system enables continuous running
  3. Double mechanical seal system equipped guarantees the complete shaft sealing
  4. Using 304 Stainless, Saltwater-proof aluminum alloy, anti-shock PBT plastics assure long durability, perfect against saltwater corrosion
  5. Small size, light, compact, easy to handle
  6. Strainer can be quickly removed without tool, make it to clean inside
  7. Wire and pump-connection part is strengthen by chain, this protects the grand part and prevent water leakage into motor room.
NO
NAME
QTY
1
Motor
1
2
Motor Flange
1
3
Motor Housing
1
4
Impeller
1
5
Impeller casing
1
6
Strainer
1
7
Gland
1
8
Oil seal
1
9
Mechanical seal
1
10
Wire rubber
1
11
Wire
1
12
Wire band
1
13
Rubber washer
2
14
Chain
1
15
Chain stopper
2
16
O ring
1
17
Press terminal
2
18
Stop ring
1
 
 
TROUBLE & REMEDY
 
Trouble
Causing
Remedy
 
Pump does not revolve
In correction of wire
Connection Sticking of
impeller
Disconnection of wire
Connect securely
Disassemble & clean
Exchange the wire
 
 
 
 
Pumping volume is small
Miss connection of+&-
Clogging of foreign substance in impeller
Clogging in strainer
Water leak from delivery hose Too this or long delivery hose
Voltage down of power  source Weak power source Weak of impeller Delivery head is too high
Connect correctly Disassemble & clean
 
Take off the strainer & clean
Stop leak
Thicken or shorten the hose Charge battery
Exchange battery Replace impeller Make low the head
 
 
 
Electricity leaks
The end of the wire is dipping in the water
Wire connecting part is dipping in the water
Looseness of screws in gland part
Break down of the mechanical seal
Pull
 
Pull up the part
 
Tighten the screw
 
Change mechanical seal
How to take off the strainer cover:
  You can easily find 2 hooks around the strainer cover. Push these hooks inside, the strainer can by sliding.
 
SPECIFICATION
MODEL
BL2524S,BL2512S
BL2524N,BL2512N
BL3224S,BL3212S
Outlet  dia.
25m/m( 1" )
25m/m(1" )
32m/m(1.2 ")
Delivery Volume
70ℓ/min.18.5U.S.G/min
70ℓ/min.18.5U.S.G/min
100ℓ/min
Delivery head
4m
6m
4m
Water temp.
0-60° C
0-60° C
0-60° C
Power
DC-24V,DC-12V
DC-24V,DC-12V
DC-24V,DC-12V
Current
2.5A,5.4A
3.8A,7.8A
3.8A,7.8A
Rating
Continuous
Continuous
Continuous
Motor  Power
45w/5400rpm
55w/7000rpm
60w/6800rpm
Weight
1.3kg
1.3kg
1.3kg
Standard Accessory
Elbow1
Elbow1
Elbow1
 
APPLICATION
  1. Pumping out water from ice
  2. Pumping fresh water in preserve
  3. Discharging of Bilge water
  4. Emergency pumping on the boat
  5. Washing on the deck
  6. Water exchanging in fish farm
  7. For camping use
  8. Car washing
 
 
 
INSTALLATION
Install the pump body ( Strainer cover ) on the desired locations. Use 4-M4 x 12 screws to fix the body.
 
SPECIFICATION
Model
WWB-05806
WWB-05807
WWB-05808
WWB-06928
Outlet dia.
1⅛ 29.5mm
1⅛ 28.5mm
1⅛ 28.5mm
1¼ 32mm
Delivery volume
1000GPH
1500GPH
2000GPH
3000GPH
Delivery head
4m
4m
4m
5m
Water temp
0-60°C
0-60°C
0-60°C
0-60°C
Power
DC-12V,DC-24V
DC-12V,DC-24
DC-12V,DC-24
DC-12V,DC-24V
Current
5.5A,3.5A
8A,5A
11A,6A
13A,9A
Rating
Continuous
Continuous
Continuous
Continuous
Motor power
45w,5500rpm
75w,6000rpm
85w/7000rpm
105w/7500rpm
Weigh
0.8kg
1.2kg
1.4kg
2.1kg
Standard Accessory
El bowl
El bowl
El bowl
El bowl
SUBMERSIBLE   PUMP
MARINEPET
 Be sure to read this manual before operation
NOT
  1. Don't run dry
  2. Don't dip the end of the wire in the water
  3. Be careful for the power voltage.
BL – 2524N, is for DC – 24V, BL2512N is for DC – 12 V. Don't mistake voltage, also connect white wire to + (plus), black wire to – ( minus). In case connecting another wire, use over 0.75 mm²
  1. Don't pull the wire. Don't handle roughly. Don't drop the pump
  2. In case of using the pump for discharging of Bilge water, the end of the delivery hose should be over the water surface. Otherwise by siphoning, the water will flow back into the bottom of the boat.
  3. Can use in a little bit oil mixed water, but don't use in gasoline, kerosene, machines oil, and solvents.
  4. Dust clogging in strainer is very often seen, this cause delivery volume decreasing. Please check the strainer occasionally.
CHARACTERISTICS
  1. Large delivery volume, high delivery pressure  aimed the maximum of this class
  2. Continuous running in the water in no problem. Unique motor cooling system enables continuous running
  3. Double mechanical seal system equipped guarantees the complete shaft sealing
  4. Using 304 Stainless, Saltwater-proof aluminum alloy, anti-shock PBT plastics assure long durability, perfect against saltwater corrosion
  5. Small size, light, compact, easy to handle
  6. Strainer can be quickly removed without tool, make it to clean inside
  7. Wire and pump-connection part is strengthen by chain, this protects the grand part and prevent water leakage into motor room.
NO
NAME
QTY
1
Motor
1
2
Motor Flange
1
3
Motor Housing
1
4
Impeller
1
5
Impeller casing
1
6
Strainer
1
7
Gland
1
8
Oil seal
1
9
Mechanical seal
1
10
Wire rubber
1
11
Wire
1
12
Wire band
1
13
Rubber washer
2
14
Chain
1
15
Chain stopper
2
16
O ring
1
17
Press terminal
2
18
Stop ring
1
 
 
TROUBLE & REMEDY
 
Trouble
Causing
Remedy
 
Pump does not revolve
In correction of wire
Connection Sticking of
impeller
Disconnection of wire
Connect securely
Disassemble & clean
Exchange the wire
 
 
 
 
Pumping volume is small
Miss connection of+&-
Clogging of foreign substance in impeller
Clogging in strainer
Water leak from delivery hose Too this or long delivery hose
Voltage down of power  source Weak power source Weak of impeller Delivery head is too high
Connect correctly Disassemble & clean
 
Take off the strainer & clean
Stop leak
Thicken or shorten the hose Charge battery
Exchange battery Replace impeller Make low the head
 
 
 
Electricity leaks
The end of the wire is dipping in the water
Wire connecting part is dipping in the water
Looseness of screws in gland part
Break down of the mechanical seal
Pull
 
Pull up the part
 
Tighten the screw
 
Change mechanical seal
 
How to take off the strainer cover:
  You can easily find 2 hooks around the strainer cover. Push these hooks inside, the strainer can by sliding.
 
SPECIFICATION
MODEL
BL2524S,BL2512S
BL2524N,BL2512N
BL3224S,BL3212S
Outlet  dia.
25m/m( 1" )
25m/m(1" )
32m/m(1.2 ")
Delivery Volume
70ℓ/min.18.5U.S.G/min
70ℓ/min.18.5U.S.G/min
100ℓ/min
Delivery head
4m
6m
4m
Water temp.
0-60° C
0-60° C
0-60° C
Power
DC-24V,DC-12V
DC-24V,DC-12V
DC-24V,DC-12V
Current
2.5A,5.4A
3.8A,7.8A
3.8A,7.8A
Rating
Continuous
Continuous
Continuous
Motor  Power
45w/5400rpm
55w/7000rpm
60w/6800rpm
Weight
1.3kg
1.3kg
1.3kg
Standard Accessory
Elbow1
Elbow1
Elbow1
 
APPLICATION
  1. Pumping out water from ice
  2. Pumping fresh water in preserve
  3. Discharging of Bilge water
  4. Emergency pumping on the boat
  5. Washing on the deck
  6. Water exchanging in fish farm
  7. For camping use
  8. Car washing
INSTALLATION
Install the pump body ( Strainer cover ) on the desired locations. Use 4-M4 x 12 screws to fix the body.
SPECIFICATION
Model
WWB-05806
WWB-05807
WWB-05808
WWB-06928
Outlet dia.
1⅛ 29.5mm
1⅛ 28.5mm
1⅛ 28.5mm
1¼ 32mm
Delivery volume
1000GPH
1500GPH
2000GPH
3000GPH
Delivery head
4m
4m
4m
5m
Water temp
0-60°C
0-60°C
0-60°C
0-60°C
Power
DC-12V,DC-24V
DC-12V,DC-24
DC-12V,DC-24
DC-12V,DC-24V
Current
5.5A,3.5A
8A,5A
11A,6A
13A,9A
Rating
Continuous
Continuous
Continuous
Continuous
Motor power
45w,5500rpm
75w,6000rpm
85w/7000rpm
105w/7500rpm
Weigh
0.8kg
1.2kg
1.4kg
2.1kg
Standard Accessory
El bowl
El bowl
El bowl
El bowl
 
 
 

 

guest
ชื่อ
Email
เบอร์โทรศัพท์

 

ที เอ็น มารีน

50/4-5 หมู่ 7 ถนนท้ายบ้าน ตำบลท้ายบ้าน อำเภอเมืองสมุทรปราการ จังหวัดสมุทรปราการ 10280

โทร.02 7035192 ,091-5758564 ,

087-4529797, 0816679233,

Fax 02 7035883  LINE ID: tnsiam

E.mail: ChotigaLim@gmail.com

, Web site : www.tn-marine.com

ดูสินค้าทุกยี่ห้อ ที่ ,Web site:wix.com/nisa1th/sounder 

ดูสินค้ามือสอง ที่ ,Web site marinethai.webiz.co.th